The iFan Pico Freeze uses Peltier semiconductor cooling technology, which can reduce the temperature of the cooling plate to approximately 10-15 degrees below ambient temperature, providing a noticeable cooling sensation. The effect may vary depending on environmental temperature and humidity, but it consistently provides a stronger cooling experience than ordinary fans.

Press and hold the power button for 2 seconds to turn on the fan, then press it once more to activate the cooling plate function. When using, you can place the cooling plate near your skin, but avoid direct contact to prevent low-temperature skin injuries. Note that the battery drains faster when using the cooling function, so pay attention to the power indicator.

This is normal. When the Peltier cooling plate operates at a temperature lower than the ambient temperature, moisture in the air condenses on the cold surface, forming water droplets. You can gently wipe it clean with a dry cloth after use.

Using a standard 5V/1A charger, it takes approximately 3 hours to fully charge from empty. During charging, the LED indicator will flash, and it will remain constantly lit when fully charged.

Peltier cooling technology requires higher power to produce a significant cooling effect. When both the fan and cooling plate are activated simultaneously, battery consumption increases substantially, which is normal. To extend usage time, you can use the fan function only.